MABIS/Duro-Med Semi-Automatic Blood Pressure Monitor - Manual (Page 8)

Battery Installation/Replacement
1) Press down and lift the cover in the direc-
tion of the arrows as shown.
2) Insert or replace 4 “AA” batteries into the
compartment, matching the indicated
polarity symbols.
3) To close, match up and connect the
bottom hooks of the cover, then push
the top end.
Note: Replace the batteries when the Low
Battery symbol appears on the display or
when the display remains blank when the
POWER button is pressed.
4) It is recommended to remove the batteries
if the unit will not be used for an extended
period of time.
– 8 –