Exit – Memorex MM1720 User Manual
Page 8
shown time plus 5 with the unit is Second
Language
Switch-over of language is indicated by menu,
including English, Chinese and other 6 languages etc
Degauss
Degauss
manually
Memory Recall
RF
.Use this selection to return to the initial factory
setting .but limited to the mode specified in appendix
Exit
EXIT
.Exit OSD adjustment, memorize the value of the
current setup
Note：The vertical and horizontal moiré values in the menu are preset by factory. No
adjustment otherwise dithering and interference will show, if so, adjust the line wave
and field wave till it get normal. (Both values are 0 in general conditions)
Control System of Power Supply (energy-saving)
The monitor is EPA ENERGY STAR® compliant when used with a computer equipped
with VESA DPMS functionality .If your computer does not support DPMS, to achieve
Energy-saving, Please install a DPMS supporting software in your computer Please consult
your local dealer for detail
Following is signal standard of power supply control.
In-phase
Stature
Mode of power supply control
Signal Normal
Mode
of
energy-saving
Line in-phase
Yes
Yes/No
Field in-phase
Yes
No/Yes
Colour of
indicator
Green/Blue Red
Power .
90W(maximum)
<5W
8