Memorex TravelDrive USB 2.0 - Manual (Page 7)

Your new Memorex ® TravelDrive™ is ready to use now. Follow the simple steps
below to begin using your new portable storage device:
1. Remove the protective snap-on cap and insert your new TravelDrive™ into an
available USB port on your computer (Figure 10).
Figure 10
NOTE: You may be required to wait a few minutes while your new TravelDrive™ is
configuring itself to your computer system. (Click “OK” or “Agree” to any driver
prompts should they appear).
VII. Using Your Memorex ® TravelDrive™:
2. For Windows ® Me and 2000, it will simply return you to your desktop once the
installation is finished. Windows ® XP will provide a confirmation message that
the new hardware is installed.
3. If you have not restarted your computer during the driver installation process
and were not prompted to do so prior to this point, restart your computer now
to complete the driver installation and drive setup.
4. Once your computer reboots, you can verify that Windows ® recognizes the
Memorex TravelDrive™ properly.
5. At the desktop screen double-click on "My Computer." The Memorex ®
TravelDrive™ should appear as a "Removable disk" icon. The actual drive
letter assigned to your TravelDrive™ will vary depending on how many other
drives are on your system (Figure 11).