Miller Electric Digi-Meter RMS (AC-DC) - Manual (Page 7)

OM-867 Page 1
SECTION 1 – SAFETY INFORMATION
mod1.1 2/93
Read all safety messages throughout this manual.
Obey all safety messages to avoid injury.
Learn the meaning of WARNING and CAUTION.
1 Safety Alert Symbol
2 Signal Word
WARNING means possible death
or serious injury can happen.
CAUTION means possible minor
injury or equipment damage can
happen.
3 Statement Of Hazard And Re-
sult
4 Safety Instructions To Avoid
Hazard
5 Hazard Symbol (If Available)
6 Safety Banner
Read safety blocks for each sym-
bol shown.
7 NOTE
Special instructions for best oper-
ation – not related to safety.
2
NOTE
ELECTRIC SHOCK can kill.
•
Do not touch live electrical parts.
•
Disconnect input power before
installing or servicing.
WARNING
READ SAFETY BLOCKS at start of
Section 3-1 before proceeding. WARNING
5
4
6
7
1 2
CAUTION
MOVING PARTS can injure.
•
Keep away from moving parts.
•
Keep all panels and covers closed
when operating.
3
Turn Off switch when using high frequency.
Figure 1-1. Safety Information
SECTION 2 – SPECIFICATIONS
Table 2-1. Meter Specifications
Specification Description
Type Of Input Power 115 Volts AC, 50/60 Hz
Input Power Cord With Plug 8 ft (2.4 m)
Voltage Sensing Cord With Clamp 21 ft (6.4 m)
Overall Dimensions See Figure 3-1
Weight Net: 13.5 lb (6.1 kg); Ship: 15 lb (7 kg)
Max. Capacity At 100% Duty Cycle 1500 Amps At 100 Volts AC/DC