Metra Electronics 99-9105 - Manual (Page 6)

4
99-9105
KIT ASSEMBLY
Slide the Double DIN radio into the
Double DIN bracket/radio housing
assembly and secure the unit to the
kit using the screws supplied with
the radio. (Figure C) 3
Cut and remove center divider
from radio housing. (Figure A) 1
Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B) 2
Snap the Double DIN trim-plate onto
the housing/radio assembly.
(Figure D) 4
DOUBLE DIN RADIO PROVISION
A
B
C D
Continue to final assembly.