Creating a go to route to a geocache waypoint, Creating a multileg route – Magellan Triton 1500 User Manual
Page 49
Routes
41
Creating a Go To Route to a Geocache Waypoint
1.
From the Map screen press MENU. (Alternate Method: Press and hold the GO TO button
while the present position cursor is displayed on the Map screen.)
2.
Select Go To.
3.
Select Geocache.
4.
If needed, change the order that the waypoints are displayed or search for a waypoint.
((Select the Search field under the Select Waypoint header. Select the order you want the
waypoints listed, either by nearest, date added, or by name. To do a search, select Search
and using the keyboard, enter the first few characters of the waypoint.)
5.
Select the waypoint you want to go to from the list of waypoints.
6.
When the waypoint name is highlighted press ENTER. Select the View icon to the left of the
waypoint name.
7.
The Geocache Waypoint Details screen is shown with the Information page displayed.
8.
With the Go To icon (arrow) highlighted press ENTER or tap on the icon.
9.
The Map screen is displayed with a preview of the route shown. The total distance for the
route is displayed at the top of the screen.
10. Press ENTER or tap on the Go To icon again to begin the route.
Creating a Multileg Route
1.
From the Map screen press MENU.
2.
Select Create.
3.
Select Route.
4.
Select the method for determining the starting location for the
route.
Current Location: The Waypoint Details page is shown with the
Information page displayed. Select the green checkmark to use
this waypoint.
Point on Map: Use the arrow keys or use the touchscreen to
scroll around the map until the pan cursor is on the point
desired. Press ENTER. When the Waypoint Details page is
displayed, make any necessary edits and select the green
checkmark.
Waypoint: Select a waypoint from the list of saved user-created
waypoints and press ENTER.
Geocache: Select a waypoint from the list of saved geocache waypoints and press ENTER.
Place: Select the map to be used. Select the category (and subcategory if required).
Select a waypoint from the list of Place waypoints and press ENTER.