Metra Electronics 88-00-2020 - Manual (Page 3)

ALL VEHICLES
DASH DISASSEMBLY
D isconnect the negative battery terminal to prevent an accidental short circuit. Unclip
the entire dash trim bezel and remove. Remove 9/32" fasteners from the right side of
the factory radio module and (2) fasteners from the left side. Disconnect the wiring and
remove the module. Refer also to instructions included with Metra Kit INST99-2020.
See Fig. A. Continue to final assembly.
1
Factory Radio
Module
88-00-2020 DASH DISASSEMBLY
A