Miele G892SC - Manual (Page 37)

What if … Possible fault Fix
the "Drain" indicator
flashes and the program
stops? The triple filter in the wash
cabinet is clogged. Clean the filter, see
maintenance instructions.
The drain pump or the
non-return valve may be
blocked. Clean the drain pump and
the non-return valve, see
maintenance instructions.
The drain hose is kinked. Remove the kink.
the "End", "Start/Stop"
and "Top Solo"
indicators flash at the
same time at the end of
a program? There may be a technical
fault. – Press the "Start/Stop"
button.
– Turn off the dishwasher.
A few seconds later:
– Turn the dishwasher on.
– Select the desired
program.
– Press the "Start/Stop"
button.
If the indicators flash
again, there is a technical
problem.
– Call the Miele Technical
Service Department.
Frequently asked questions
37