Metra Electronics 99-9107B - Manual (Page 5)

3
99-9107B
KIT ASSEMBLY
Slide the head unit into the radio
opening until the slide clips
engage. (Figure B) 2
Mount the ISO Brackets to the
head unit with the screws sup-
plied with the unit. (Figure A) 1
Snap the pocket into the Radio
Housing. (Figure C) 4
Snap the ISO Trim Plate into the
Radio Housing. (Figure B) 3
Snap the radio assembly into the
factory radio opening. 6
Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-con-
nect the negative battery terminal
and test the unit for proper opera-
tion. 5
ISO DIN HEAD UNIT PROVISION
A
B
C
NOTE: Once the dash kit is snapped
in, it cannot be removed without
dash panel removal