Memorex MC2842 - Manual (Page 11)

10
OPERATION (CONTINUED)
Press the POWER button ❶ to turn the
unit on; the POWER indicator will light.
Slide the FUNCTION switch ❷ to the CD
position. Press the PROGRAM button ❸
once; “P 01:” will appear in the display
and the PROGRAM indicator will blink.
1
3
2
1
Within 7 seconds, select the first track to
be played back using the
SKIP/SEARCH
❶ or ❷ button , then press the
PROGRAM button ❸ again. Repeat this
step to program additional tracks up to a
maximum of 20 tracks.
2
1
3
2
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
Press the PLAY/PAUSE ( ) button
to begin playback. The unit will play all
the tracks in the order you
programmed them.
3
Adjust the VOLUME control ❶ as desired.
When the disc is through playing, it will
stop. Press the STOP (■) button ❷ to
stop the disc before it is finished.
2
1
4
NOTES:
• To skip forward or backward through the programs, press the SKIP/SEARCH
or button. When the disc is through playing, it will stop.
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Press the REPEAT button twice before pressing the PLAY/PAUSE ( )
button to begin Program playback to activate Repeat All playback.
FAQS: How do I clear the memory?
Press the PROGRAM button to enter the Program mode, and then
press the STOP ( ) button or change the position of the FUNCTION switch.
MC2842 O/M.QXD 6/20/03 10:39 AM Page 10