MITSUBISHI ELECTRIC S50 - Manual (Page 15)

EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the $ or % button to select the INSTALLA-
TION menu.
3. Press the ENTER button (or } button).
4. Press the { or } button to select AUTO POWER
OFF.
5. Press the $ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, press the
RESET button on the terminal board using the suit-
able implement
• If the COMPUTER or VIDEO button is pressed, the
MENU selection bar or MENU will disappear.
• The settings with 2 mark, you should press the
ENTER button after selecting.
Menu operation
Opt
IMAGE
XGA60
INSTALLATION
Opt XGA60
IMAGE REVERSE
INSTALLATION
OFF
AUTO POWER ON OFF
AUTO POWER OFF OFF
Opt XGA60
IMAGE REVERSE OFF
AUTO POWER ON OFF
AUTO POWER OFF OFF
IMAGE REVERSE OFF
AUTO POWER ON OFF
AUTO POWER OFF 30 min
IMAGE CONTRAST
±
30
BRIGHTNESS ± 30
1 COLOR MATRIX
SHARPNESS ± 10
TINT ± 10
COLOR
±
10
RED ± 10
YELLOW ± 10
BLUE
±
10
GREEN
±
10
CYAN ± 10
MAGENTA
(Displays only when the source is selected to VIDEO)
(Displays only when the source is selected to VIDEO)
(AUTO : When the source is selected to COMPUTER)
±
10
CONTRAST R ± 30
CONTRAST B
±
30
BRIGHTNESS R
±
30
BRIGHTNESS B ± 30
EXPAND MODE 1 - 2
1=Upper left, 2=Lower right
INSTALLATION IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT
AUTO POWER ON ON, OFF
AUTO POWER OFF
1 - 3
ON, OFF
FEATURES MENU POSITION
OFF, 5, 10, 15, 30, 60 min
VIDEO SIGNAL
AUDIO MODE
ANAMORPHIC
AUTO, NTSC, PAL, SECAM, 4.43NTSC, PAL-M, PAL-N, PAL-60
LANGUAGE
SIGNAL MEMORY CALL AUTO, USER1, USER2
HORIZ.POSITION 0 - 999
VERT.POSITION 0 - 999
FINE SYNC. 0 - 39
TRACKING
USER
0 - 9999
CLAMP POSITION 0 - +63
CLAMP WIDTH 0 - +63
HORIZ. PIXELS 0 - 9999
VERT LINES 0 - 9999
PLL AUTO, 0 - 7
SHUTTER (L) 0 - 299
SHUTTER (U) 0 - 299
VERT. SYNC AUTO, ON, OFF
2
3
USER
USER
OFF
STANDARD
HIGH
LOW
COLOR TEMP.
USER
MEMORIZE
*
*
*
HOLD AUTO
USER1, USER2
DELETE USER1, USER2
DEFAULT
ON BEGIN -1 - -99
END 1 - 99 OFF
COMPUTER INPUT RGB, YC B C R / YP B P R
*
*
*
*
* : Setting range is different
according to the type of
the signal.
, English, Español, Deutsch, Français, Italiano,