Meridian America Meridian 505 - Manual (Page 18)

Setting up the mono power amplifier
14
Cleaning
When cleaning the mono power amplifier bear in mind that the
front of the unit is metal, and the lid is glass.
Disconnect the power cord before cleaning the unit.
Note: Do not use abrasive cleaners on any part of the mono
power amplifier.
To clean the case
● Use a slightly damp cloth.
Ensure that no water is allowed to get inside the case, and do
not reconnect the power until you are certain that the mono
power amplifier is completely dry.
To clean the audio connections
The audio socket on the back of the mono power amplifier is
gold-plated and needs no cleaning if a gold-plated phono plug is
used. Otherwise, it is recommended that you unplug and
reconnect the plug at least once a year. A proprietary contact
cleaner can be used to some advantage.
Maintenance
To change the mains fuse
Fuse
Spare
● Remove the mains connector, and pull out the drawer next to
the power input to access the fuses.
Before replacing a blown fuse, if possible ascertain the cause of
the failure.
The fuse drawer includes a spare fuse. This should be replaced
by one of the same rating.