Magnepan Magneplanar CC3 - Manual (Page 6)

Attenuation is accomplished by insertion of a simple, non-inductive resistor in series
with the tweeter (see Figure B). Replace the jumper with the appropriate resistor to
obtain the desired tweeter attenuation (typically 1 ohm for most rooms). The 1 ohm
resistor provided will attenuate the tweeter 1 - 2dB. Other values are available from
your Magneplanar dealer.
Figure B
9. SERVICE AND SHIPPING
In the unlikely event you should need service for your CC3 Loudspeaker, we
recommend you return it through your dealer. He is experienced in providing service
and can assist you if the speaker must be returned to the factory. If you determine you
need to return it directly to Magnepan, ship the speaker freight prepaid to:
Magnepan, Incorporated
1645 Ninth Street
White Bear Lake, MN 55110
Include a note describing the nature of the problem. Please include your name,
address, and a daytime telephone number.