Motorola LS350 - Manual (Page 5)

How To Set Timer with Call Back Feature
1) To set the timer using the keypad, enter the number of
minutes you would like the timer to count down. Then
press the
"Message"
key and enter the pager number you
would like to
Call Back
to the room you are timing down in.
Now press the
"Timer"
key.
2) After the timer has timed down the selected pager will
vibrate or sound an alert depending on the mode that you
have chosen and the
Motorola
icon will be blinking.
Press the
Read Button
. The display will show the current
number of new pages being held in memory. See Diagram
11.
Number of New Pages
Diagram 11
3) Press the
Select Button
on the front of the pager. The
display will show the room number that the time down
procedure occurred in. See Diagram 8.
Room 6 has sent a Call Back Page.
Diagram 8
4) Press the
Select Button
again and message’s time stamp
will display. See Diagram 12.
1st Page received at 2:25 PM
Diagram 12
Note:
Please refer to the
LS350 User's Guide
for further
detail on protecting, selective deleting, and erasing
messages.•
NEW: 1
6
1: 2:25P