MACKIE C200 - Manual (Page 4)

4
Mixer or
Preamplifier
Right
Line level
Output
Left
Line level
Output
1202-VLZPRO
Stereo
Power Amplifier
C300
C200
INPUT THRU PARALLEL
SERIAL NUMBER MANUFACTURING DATE
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA AND WOODINVILLE, WA, USA MANUFACTURED IN CHINA • FABRIQUE AU CHINE • COPYRIGHT ©2003 THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES.: "MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING
C200
INPUT THRU PARALLEL
SERIAL NUMBER MANUFACTURING DATE
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA AND WOODINVILLE, WA, USA MANUFACTURED IN CHINA • FABRIQUE AU CHINE • COPYRIGHT ©2003 THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES.: "MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING
HOOKUP.DIAGRAMS
. Turn on your mixing console (or other
signal source).
4. Turn on the amplifier. Turn up its vol-
ume or gain control(s) as recommended
by the manufacturer.
5. Start the signal source, whether it be
speaking into a microphone or starting
a CD player. Adjust the volume controls
on the mixer (or other signal source) for
normal operation.
Quick.Start
Make all initial connec-
tions with the power
switches OFF on all
equipment. Make sure all
master volume, level, or
gain controls are all the way down.
1. Connect the line-level outputs from your
mixing console (or other signal source)
to the inputs of your power amplifier.
. Connect the “Speaker Output” from
your power amplifier (or powered mixer)
to the INPUT connector on the C00.
C200: WITH A MIXER AnD POWER AMPLIFIER
MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS
2 PER POWERED MIXER OR AMPLIFIED CHANNEL
POWERED MIXER
C200: WITH A MACKIE POWERED MIXER, AnD uSIng THE THRu jACK