Motorola GT10 User Manual
Page 51
Advertising
GT10/GT30
3.1
Setup Procedure for the GT10
28
When the menu operation as shown at the left page is carried out, the configuration file
is sent to the GT10. During the transfer, a screen like that shown below is displayed.
GTWIN
GT10
Transferring
PC
→
GT
GT10 Configuration
file being transferred
Screen transfer cable
(AFC8513D)
(4) Setup is completed.
If the transfer has been completed without any problems, the setup is completed.
CAUTION
Backup of the GT10 Configuration file
The GT10 Configuration file is stored in the user memory (F–ROM) of
the GT10. This file is deleted if the memory is initialized using the
command on the system menu of the GT10 main unit (see page 89),
and will have to be transferred again.
Advertising