Maxon Telecom SP210 - Manual (Page 15)

SP200/210 Maxon SP200/210 Radio
Issue 1.0 INSTALLATION, COMMISSIONING & ALIGNMENT
03/01 Page 4-1
4 INSTALLATION, COMMISSIONING & ALIGNMENT
4.1 Installation
The SP200/210 is a hand-held radio and thus requires no installation.
The User should ensure that the batteries are charged before commencing commissioning tests.
4.2 Connections
1. Antenna connector: socket.
2. Channel Busy / Talk tri-colour LED.
3. Display
4. Main Power switch and volume
control. Fully anti-clockwise is the
OFF position.
5. Battery Release Catch.
6. Speaker.
7. Push To Talk (PTT) button.
8. Microphone.
9. Scan button.
10. Monitor button (unmutes the radio).
11. Channel select keys: Up / Down
keys, used to select channels.
12. Accessories socket (microphone &
speaker)
Note: Socket 12 is the Accessories
Connector, which may be used to
connect the radio to the following:
An optional remote speaker / microphone
An optional headset
A PC for programming using
SMP6100software
1 2 4
12
6
7
8
9
10
11
5
BACK
3
Figure 4-1 - Connections and controls