Before your first use, Attaching accessories, Removing beaters – Magic Chef MCHM1W User Manual

Page 6: Mixing, Operating instructions

Advertising
background image

6

Before Your First Use


Carefully unpack the hand mixer and remove all packaging materials. Wipe the
main unit with a clean, damp cloth. Do not immerse the main unit in water or
other liquid. To remove any dust that may have accumulated on the removable
parts during packaging, wash the accessories with warm soapy water or place in
the top rack of the dishwasher. Rinse and dry thoroughly.

Operating Instructions


ATTACHING ACCESSORIES

1) Make sure that the speed control knob is in the “0” position and that it is

disconnected from the outlet.

2) Insert one beater at a time by placing the stem end of the beaters into the

opening on the bottom of the mixer. Press and twist lightly until the beater
clicks into position.

REMOVING BEATERS

1)

Make sure that the speed control knob is in the “0” position and that the
main unit is disconnected from the outlet.

2)

Press the ejector button (speed control knob) firmly to release the beaters
from the mixer.

3)

Remove beaters from the mixer.


MIXING

1) Begin blending or mixing at a low speed, guide mixer around sides and

through the center of the bowl. Follow the speed guide. Over-beating tends
to make some mixtures tough. Stop the mixer as needed, to scrape the sides
and bottom of the bowl with a rubber spatula.

2) To add ingredients, rest the mixer on its heel with beaters positioned over the

mixing bowl. This assures drippings will fall back into the mixing bowl. To
remove excess batter from the beaters, set the mixer to the lowest speed
and raise the beaters slowly. Be sure to turn unit to “0” position before raising
the beaters completely out of the mixing bowl.





Advertising