MITSUBISHI ELECTRIC VS-50XL50U - Manual (Page 7)

EN-7
ENGLISH
5. Insert a new lamp into the lamp
storage to the end.
• Do not touch the glass envelope of the lamp
with your fingers. The oil on your fingers
may cause damage or explosion of the lamp.
• Be sure to grip the handle with one hand
and hold the lamp with the other hand to
insert it safely. Be careful not to pinch your
hand in the lamp storage.
6. Tighten the two lamp fixing screws.
7. Close the lamp replacement door.
8. Carry out the adjustments after
replacement of the lamp.
You can display images after replacing the
lamp. However, the following adjustments are
required to enjoy the equivalent image quality
to that offered before the replacement of the
lamp. Please contact your MITSUBISHI
dealer for the following adjustments. Do not
attempt to carry out the adjustments by
yourself.
• Picture outline adjustment
• CSC adjustment
• Gradation adjustment
Lamp replacement (Only followed models : VS-50XL50U, VS-67XL50U)
1. Turn off the main power switch and
unplug the power cord from the wall
outlet.
Wait at least one hour for the lamp to cool
down.
2. Hold the handles by the fingers and
pull the lamp replacement door open.
3. Loosen the two lamp fixing screws.
4. Hold the handle and pull out the
lamp.
• Be sure to grip the handle with one hand
and hold the lamp with the other hand to
pull it out safely.
• Do not touch the glass envelope of the lamp.
It may cause burns.
Handles
Lamp replacement
door
Lamp
fixing
screws
Handle
Lamp
fixing
screws