M-AUDIO O2 - Manual (Page 3)

Recalling Presets
Press the Preset “+” and “-” button to recall one of the preset memories. The LED will display the currently selected preset, preceded by a “p.” Press
the button again to change the preset to the next one in the series.
The following is a list of the presets contained in the 5 memory locations.
• 01 GM Preset • 04 Yamaha XG/Roland JV Preset
• 02 Reason Native • 05 Undefined CC’s for MIDI learn*
• 03 Reason Mixer
*Some Applications do not have any default settings and require you to set the MIDI controllers for the application’s parameters yourself.
This normally involves placing the application in MIDI Learn Mode, clicking on a controller and moving the dial. With such an application, it
is recommended that you use controller numbers that tend not to have any function associated with them. Ableton Live is an example of an
application that uses the MIDI Learn feature.
Saving and Organizing Presets
You may want to save and reorganize the order of Presets to suit your setup.
Note that the factory presets are stored in ROM within the keyboard and can be restored at any time.
For example, let’s move preset 2 (“Reason Native”) to location 4 by carrying out the following procedure:
1. Recall preset 2 by pressing the Preset “+” and “-“ buttons accordingly.
2. Press the ADVANCED FUNCTION button. The keyboard will enter Program Mode.
3. Press the STORE key on the keyboard.
4. Type in “4” using the numerical data entry keys.
5. Press the ENTER key to confirm.
This will save or store the current setup to preset location 4.
If you want to reset the M-Audio O
2
to the factory defaults, hold down the Preset “+” and “-” buttons while switching the keyboard on.
NOTE: Restoring the Factory presets will erase all setups you have programmed and stored to memory.
You can also organize and store your presets on your computer using the Enigma software. This software is available as a free download at www.
m-audio.com. Simply register your M-Audio product and follow the instructions from there.
Octave
The keyboard can be shifted up or down to give you access to a total of 11 octaves on the M-Audio O
2
.
1. Press “OCTAVE +” for every octave you want to shift the keyboard up.
2. Press “OCTAVE -” for every octave you want to shift the keyboard down.
Pitch Bend Control
The Pitch Bend is used to bend the notes played on the keyboard up or down. This allows phrases not normally associated with keyboard playing,
such as guitar riffs, to be played.
Your sound source determines how far you can bend the note. It is typically set to 2 semitones but can be up to 2 octaves +/-. When you release
the control, it will reset back to 0.
The Pitch Bend control on your M-Audio O
2
keyboard is fully MIDI assignable. Please refer to the “Programming and Editing” section of the User
Manual for more information.
Modulation Control
The Modulation control is used for modulation of the sound being played. This type of real-time controller was introduced on electronic keyboards
to give the performer the option of adding vibrato to similar to acoustic instruments.
The Modulation control on your M-Audio O
2
keyboard is fully MIDI assignable. Please refer to the “Programming and Editing” section of the User
Manual for more information.
ESD and Fast Transient may cause the unit to temporarily malfunction.
Switch off and on again to restore normal operation.”
O
2
Tested to comply with
FCC standards
FOR HOME OR STUDIO USE
English • 2 Français • 1
070404_02_QSG_EN01
WARNING: This product contains chemicals, including lead,
known to the State of California to cause cancer, and birth
defects or other reproductive harm. Wash hands after handling.