Mamiya 645 AF - Manual (Page 27)

Multiple Exposure Mode
With the multiple exposure mode, the same frame of film can be exposed multiple times.
1. Press the mode setting button ”A” twice to en-
ter the multiple exposure mode.
2. Turn the front or rear dial to set the number of
additional exposures.
The number of additional exposures can be set
between 1 and 5. The setting is registered after 5
seconds or when the shutter release button is
pressed.
*For example, when the number of
additional exposures is set to "2", the
same frame of film will be exposed three
times, after which the film is advanced.
3. Press the shutter release button. The current
frame is exposed multiple times.
The multiple exposure mode is canceled
automatically once the set number of additional
exposures have been taken.
*The multiple exposure mode mark is displayed on the main LCD panel during the
multiple exposure mode.
*The same frame is exposed multiple times, so exposure compensation may be
required .
*To check the number of additional exposures remaining during the multiple ex-
posure mode, press the mode setting button “A” once. The remaining number of
additional exposures is displayed on the external liquid crystal display panel.
*If you wish to make more than 5 additional exposures, the number of additional
exposures can be incremented during the multiple exposure mode by pressing the
mode setting button “A”
and turning the front or rear dial.
*When the shutter release mode is set to "C" (continuous advance mode), once the
set number of additional exposures have been taken, the camera is reset to the
normal shooting mode.
*To cancel the multiple exposure mode, press the mode setting button “A” twice.
The multiple exposure mode is canceled and the camera is reset to the normal
shooting mode.
*When the shutter release mode selector lever is set to "L" (power off), all the
settings aside from the selected mode are reset to the default values.
Canceling the Multiple Exposure Mode
To cancel the multiple exposure mode before all
the additional exposures have been taken, with
the dark slide removed, half-press the shutter re-
lease button while pressing the roll film holder's
manual film advance button “B”
.
51 52