Marantz DV4200 - Manual (Page 16)

PAGE 16 CONNECTIONS
Connecting to Optional Audio System (Cont’d)
Enjoying 2 Channel Digital Stereo Sound
Enjoying DTS Sound
VIDEO
OUT
VIDEO
OUTPUT
L
R
S-VIDEO
OUT
C R
C B
COMPONENT
VIDEO OUT
COAXIAL
DIGITAL
OUT
AUDIO
OUT1
AUDIO
OUT2
L
R
REMOTE
CONTROL
IN
OUT S-VIDEO
COMPONENT
Y
Connection example
Front speaker
(left)
Front speaker
(right)
TV
Receiver equipped with a
digital audio input
To DIGITAL OUT
75 ohm coaxial cable
To digital audio input
To S-video Input
or Video Input
S-Video cable
or Video cable
To S-VIDEO OUT
or VIDEO OUT
VIDEO
OUT
VIDEO
OUTPUT
L
R
S-VIDEO
OUT
C R
C B
COMPONENT VIDEO OUT
COAXIAL
DIGITAL
OUT
AUDIO
OUT1
AUDIO
OUT2
L
R
REMOTE
CONTROL
IN
OUT S-VIDEO
COMPONENT
Y
To DIGITAL OUT
Front
speaker
(left)
Rear speaker
(left surround)
Rear speaker
(right surround)
Front speaker
(right)
Sub woofer
Center
speaker
75 ohm coaxial cable
Connection example
To digital audio input
Receiver equipped
with a DTS decoder
To S-VIDEO OUT
or VIDEO OUT
To S-video Input
or Video Input
S-Video cable
or Video cable
2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a
digital audio input and speaker system (right and left front speakers).
Introducing DTS Digital Surround TM ...the finest technology ever invented to transform existing "home theatre" systems into six
discrete channels of exceptionally clear, better-than-compact disc, digital audio performance. And DTS Digital Surround is the
only 5.1 surround sound format that can deliver this revolutionary 3-dimensional experience through new music recordings on
compact discs, original 5.1 soundtracks on motion picture laserdiscs, and soon, a wide variety of products on DVD.
❍ Refer to the owner’s manual of your receiver as well.
❍ Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
❍ The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listen-
ing level. Otherwise, the speakers may be damaged by a sudden high volume sound.
❍ Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the
speakers may be damaged.
❍ When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo
jacks. To avoid possible damage to the audio system, you should take proper precautions when the AUDIO OUT jacks of the
DVD video player is connected to an amplification system. To enjoy DTS Digital Surround playback, an external 5.1 channel
DTS Digital Surround decoder system must be connected to the DIGITAL OUT jack of the DVD video player.
Notes
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.