Miller Electric 255 - Manual (Page 31)

OM-157 066 Page 27
See Table 6-1
Drive Roll & Wire Guide Kits.
148 529-H
.
Hardware is common and
not available unless listed.
Figure 6-3. Wire Drive And Gears
Table 6-1. Drive Roll And Wire Guide Kits
IMPORTANT: Base selection of drive rolls upon the following recommended usages:
1. V-Grooved rolls for hard wire.
2. U- Grooved rolls for soft and soft shelled cored wires.
3. U-Cogged rolls for extremely soft shelled wires (usually hard surfacing types).
4. V-Knurled rolls for hard shelled cored wires.
5. Drive roll types may be mixed to suit particular requirements (example: V-Knurled roll in combination with
U-Grooved).
Wire Diameter
Fraction Decimal Metric
.023/.025 in.
.030 in.
.035 in.
.045 in.
.023/.025 in.
.030 in.
.035 in.
.045 in.
0.6 mm
0.8 mm
0.9 mm
1.2 mm
Kit No.
087 131
079 594
079 595
079 596
Drive Roll
Part No. Type
087 130
053 695
053 700
053 697
V-Grooved
V-Grooved
V-Grooved
V-Grooved
Inlet
056 192
056 192
056 192
056 193
Wire Guide
Ref. S-0026-B/7-91