Motorola A1000 - Manual (Page 22)

22 - Getting Started
Charging the Battery using the Travel Charger
New batteries are shipped partially charged. Before you can use
your handset, you need to install and charge the battery, as
indicated by the following instructions. Some batteries perform best
after several charge/discharge cycles.
Action
1 Plug the charger in
with the release tab
up.
2 Plug the other end into an electrical outlet. While the battery
is charging,
Charging Battery and the battery’s current charge
level ( Very Low to High ) display on the screen.
3 When Charging Complete displays, press the release tab and
remove the charger.
UG.A1000.book Page 22 Wednesday, September 15, 2004 2:35 PM