Magnadyne MV-DVD-PL2 - Manual (Page 13)

13
Basic Operations
Function
The function only works for discs having
scenes recorded at different angles.
Press ANGLE during playback. Each time
the button is pressed, the number of the
angle changes in sequential order.
Program Play
(Only available on certain types of discs)
When disc play is stopped:
1. Push the PROGRAM button to displayed
the programming screen.
2. Use the NUMBER buttons to enter the
desired chapter or track.
Example: To play Track 5, then Track 3,
and finally Track 16. Push 3, 5, 10+ 6 in
that order.
3. Use the SELECTION buttons
to select "Start" and then press ENTER
to start Program Play.
Note: When the symbol is displayed,
this signifies an invalid operation that is
not accepted by the DVD player.
Repeat Play
While a disc is playing, continue pushing
REPEAT to select from three repeat modes.
For DVD discs:
Push REPEAT to repeat Chapter.
Push REPEAT again to repeat Title.
Push REPEAT again to repeat All.
Push REPEAT once more to Exit.
For C
D discs:
Push REPEAT to repeat Track.
Push REPEAT again to repeat All.
Push REPEAT once more to Exit.
Zoom
While playing a disc, press the ZOOM but-
ton to increase or decrease the screen
image. There are magnification levels:
three levels of increased magnification X2,
X3, X4 and three levels of decreased mag-
nification 1/2, 1/3, 1/4. Zoom toggles
through each of the six magnification lev-
els, then returns to normal size on the sev-
enth press of the button.
MV-DVD-PL2-UM.qxp 2/10/06 15:13 Page 13