Connecting to a dvd player – Matsui America M22LID618 User Manual
Page 14
- 13 -
Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer to your DVD player’s instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an
HDMI socket, you can connect via HDMI. When you connect to DVD
player as illustrated below, switch to HDMI source. See, “
Input selection” section.
• Most DVD players are connected through
RCA SOCKETS. Use a RCA video cable to connect
video input. For enabling audio, use a component audio cable as illustrated below. When
done, switch to
F-AV- source. See, “Input selection” section.
• You may also connect through the
SCART . Use a SCART cable as shown below.
HDMI
Input
SCART
sockets
HDMI
cable
SCART
cable
RCA
cable
REAR VIEW
Note: These three methods of connection perform the same function but in different levels of
quality. It is not necessary to connect by all three methods.
00-ENG-01-TV-2297W-UK IDTV-1165UK-VGA-10057841.p65
25.06.2008, 09:06
13