Memorex MVT2090 - Manual (Page 14)

14
TV CATV
VHF
2-13
UHF
14-69
VHF
2-13
STD / HRC / IRC
14-36 (A) (W)
37-59 (AAA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)
You must set the date and time manually for Timer
Recordings, ON/OFF Timer and Daylight Saving Time
if the Auto Clock process did not set them correctly.
EXAMPLE: Setting the clock to “8:30 AM”, 26th (SAT)
October, 2002.
1 Press the MENU button.
Press the SET/TRACKING + or –
button to select the SYSTEM
SET-UP option, then press the
ENTER button.
2 Press the SET/TRACKING + or –
button to select the CLOCK SET
option, then press the ENTER
button.
3 Press the SET/TRACKING + or –
button to set the month, then press
the ENTER button.
4 Set the day, year and time as in
step 3.
After setting the clock, time and date,
the time starts functioning automati-
cally.
SYSTEM SET-UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈 +/–/ENTER/MENU 〉
M E N U
TIMER REC SET
TV SET-UP
CH SET-UP
AUTO REPEAT ON OFF
SYSTEM SET-UP
〈 +/–/ENTER/MENU 〉
NOTES: • After a power failure or disconnection of the
power plug, the time display will be lost. In
this case, set the present time again if the
Auto Clock did not set correctly.
• To move cursor backward, press the CANCEL
button.
CLOCK SET
〈 +/–/ENTER/CANCEL/MENU 〉
MONTH
DAY
YEAR
TIME
10
1 (SUN)
2000
12 : 00 AM
CLOCK SET
〈 +/–/ENTER/CANCEL/MENU 〉
MONTH
DAY
YEAR
TIME
10
26 (SAT)
2002
8 : 30 AM
NOTES: • If a channel with no broadcast is selected,
the sound will automatically be muted.
• If a station being viewed stops broadcasting,
the TV will automatically shut itself off after
15 minutes.
1 To turn on the TV/VCR, press the POWER button.
2 Adjust the volume level by
pressing the VOLUME Up or Down
button. The volume level will be
indicated on the screen by green
bars. As the volume level
increases, so do the number of
bars. If the volume decreases, the number of green
bars also decreases.
3 Set the TV/CATV menu option to the appropriate
position (See page 16).
VOLUME 32
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed,
the corresponding channel will be
selected in 2 seconds.
CH 012
VHF/UHF/CATV CHANNELS
MANUAL CLOCK SETTING
TV - VHF/UHF Channels
CATV - CABLE TV Channels
4 Press the Direct Channel selection buttons to select
the channel.
• TV mode direct channel selection
When the TV/CATV menu option is in the TV
position, all channels can be instantly selected by
using two buttons (for example, to select channel 2,
press "0", then "2". If you press only "2", channel
selection will be delayed for a few seconds). For
channels 10 and above, press the 2 digits in order.
• CATV mode direct channel selection
When the TV/CATV menu option is in the CATV
position, channels can be selected as follows:
• TO SELECT CATV CHANNELS:
1-9 Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press "002".
10-12 Press "0", then the remaining 2 digits.
Example, to select channel 12, press "012".
13-99 Press the 2 digits in order.
Example, to select channel 36, press "36".
100-125 Press the 3 digits in order.
Example, to select channel 120, press "120".
8 : 30 AM SAT
TV OPERATION
5B01201A E P12-19 04/04/2002, 17:49 14