Dmc3-4, 0 to – M&S Systems dmc3-4/dmc1CD User Manual
Page 13
dmc3-4
M&S Systems | 2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com
8
To change volume and tone settings:
1.
Press POWER to turn on music. The system defaults to music volume. Use
VOLUME UP and VOLUME DOWN to adjust the music volume from 0-29. All
other audio settings return to music volume after 5 seconds.
2.
Press TONE. Master Volume appears. This controls the volume for the Master
Station speaker only. Use VOLUME UP and VOLUME DOWN to adjust the Master
Volume from 0-
1
4.
Note: When music is off, use VOLUME UP and VOLUME DOWN to adjust Master
Volume.
3.
Press TONE. The Loudness function appears. Press VOLUME UP to turn Loudness
on. Press VOLUME DOWN to turn Loudness off.
4.
Press TONE. The Treble function appears. Use VOLUME UP and VOLUME DOWN
to adjust the treble from 0-
1
4.
5.
Press TONE. The Bass function appears. Use VOLUME UP and VOLUME DOWN
to adjust the bass from 0-
1
4.
6.
Press TONE. If you have the optional stereo power amplifier, the Balance function
appears. Use VOLUME UP and VOLUME DOWN to adjust the Balance from +
1
0 to
–
1
0. (Zero = equal balance.)
7.
Press TONE. Intercom Volume appears. Use VOLUME UP and VOLUME DOWN
to adjust the Intercom Volume from 0-
1
4.
Note: When music is off, press TONE to access Intercom Volume, then use
VOLUME UP or VOLUME DOWN to adjust Intercom Volume.
Figure 6—Audio Settings: Music Volume
¿
TUNE
12:20
AUTO
TIME
PRESET
POWE
TONE
SOURC
¿
VOLUME
À
LISTEN TALK
DOOR TALK
¿
TUNE
À
MUSIC Volume
Turn on
music
Select setting
to change
Change
setting