Marantz ES7001 - Manual (Page 18)

16
ENGLISH
z
m
. ,
x
!2 q r e
Flashes while the muting function is activated.
BASIC OPERATIONS
TURNING ON THE UNIT
1. Turn on the power of the audio equipment
connected to this unit. Set the input selector
on the audio equipment to this unit.
2. Connect the AC power cord to the wall
outlet.
3. Press the ON/STANDBY button q on the
unit or POWER button z on the remote
controller to turn on the power of the unit.
• Each time the button is pressed, the
power of the unit is switched between on
and standby mode.
7
Auto-power-off function
• If the power of the connected DVD player,
TV, video game console, etc. is turned off
and the power of the unit remains on, the
unit automatically goes into standby mode.
• If no signal is input to this unit for five
minutes with the input selector set to “DVD,”
“TV” or “GAME,” the unit automatically goes
into standby mode.
PLAYING THE INPUT
SOURCE
The procedure for operating the unit for
playback with a DVD player is described below
as a representative example.
Check that the DVD player and the unit are
correctly connected, referring to “Connections”
in this Guide.
7
To play a DVD disc with the
DVD player
1. Turn on the power of the DVD player.
2. Press the ON/STANDBY button q on the
unit or POWER button z on the remote
controller to turn on the unit.
3. Press the INPUT SELECT button !2 on
the unit repeatedly to select “d1” or the d1
button of the input select buttons x on the
remote controller.
4. Load a disc into the DVD player and start
playback.
5. Adjust the volume with the VOLUME
+/– buttons e/r on the unit or the MAIN
VOLUME +/– buttons m/, on the remote
controller.
7
Muting function
Press the MUTE button . on the remote
controller to mute the sound temporarily.
While the muting function is activated, the
volume level indication flashes in the display
window.
To restore the sound, press the MUTE button
. or the MAIN VOLUME +/- buttons m/,
on the remote controller, or the VOLUME
+/– buttons e/r on the unit.