MicroNet Technology RAIDBANK 5 - Manual (Page 46)

RAIDBank5 Owner’s Manual 46
Disk Bus Interface
5 hot swappable, SATA2-NCQ enabled 3.5” disk drive mechanisms
5 discrete SATA2 drive channels
48-bit LBA support allows disks exceeding 2TB
RAID Features
RAID level 0, 1 (0+1), 3, 5, Span, JBOD, disk passthrough
Multiple RAID selection
Hardware AES Data Encryption
Automatically and transparently rebuilds hot spare drives
Hot swappable disk drives
Instant availability and background initialization
Automatic drive insertion / removal detection and rebuilding
Field-upgradeable firmware in flash ROM
RAID Control via rotary switch/front panel/host software
Hot swappable fan module
Host Bus Channels
External SATA-300 channel; Transfer rate up to 300MB/sec with Native Command Queuing
support
USB 3.0 host channel, 5gbit XHCI transfers enabled, backwards compatible with USB 2.0
FireWire 800/400 Host Channels
Monitors / Indicators
LCD Display and Control Panel for setup, alarm mute and configuration
5 drive LED indicators and 3 environment LED indicators
Environment and drive failure indication through LCD, LED and alarm buzzer
RAIDBank5 Dimensions:
Width: 5.5” (140mm)
Depth: 9.5” (242mm)
Height: 8.1” (208mm)
Power Consumption:
Normal operation: 2.3 AC Amps @ 115 Volts
Spin up (peak): 3.70 AC Amps @ 115 Volts
Power Requirements:
Internal Auto-sensing 220W power supply (90-240vac) (47-62Hz)
Operating Environmental Specifications:
Temperature 5ºC - 35ºC (41ºF - 95ºF)
Humidity 20% -80% RH (Non-condensing)
Weight:
7 lbs empty
16 lbs with drives.
Appendix D: Product Specifications
D-Product Specifications