Mercedes-Benz 2005 CLK-Class Coupe - Manual (Page 410)

408
Practical hints
Replacing bulbs
Front lamps Bi-Xenon*-type
1 Bulb socket for turn signal lamp
2 Housing cover for high beam flasher,
parking and standing lamp
3 Housing cover for Bi-Xenon* headlamp
4 Bulb holder for high beam flasher bulb
5 Bulb socket for parking and standing
lamp bulb
High beam bulb for high beam flasher
̈ Turn housing cover 2 counterclock-
wise and remove it.
̈ Turn bulb holder 4 with the bulb coun-
terclockwise and remove it.
̈ Pull the bulb at its socket out of bulb
holder 4.
̈ Insert the new bulb so that its socket
locates in the recess of bulb holder 4
and is level to it.
̈ Reinsert bulb holder 4 with the bulb in
the lamp and turn clockwise.
̈ Align housing cover 2 and turn it
clockwise.
Warning!
G
Do not remove the cover 3 for the Bi-Xe-
non* headlamp. Because of high voltage in
xenon lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.