Munchkin Baby Accessories - Manual (Page 3)

Before each use
• Prior to sterilizing, wash all items in mild soapy water and rinse thoroughly in
unsoftened water. Do not use antibacterial soap.
• Remove rack and pour 7 fl. oz. of water, preferably distilled, into the reservoir.
• Put the rack back into the base.
When loading the sterilizer, always ensure the items are
positioned to allow effective circulation of steam.
To load up to four 5 oz. or 9 oz. wide mouth bottles
(see diagram B)
• Place the inverted bottles into crescent-shaped holders around the rack's central
stem.
• Place nipples around the edge and slot dome caps into holder above the nipples.
• Place locking rings on their side, behind bottles.
2
B