Motorola NETOPIA 2247/57-62 - Manual (Page 16)

16
ENGLISH
This section gives some simple suggestions for troubleshooting problems with your Gateway’s initial
configuration.
Before troubleshooting, make sure you have
• plugged in all the necessary cables (see “Connections” on page 4 ); and
• set your PC’s TCP/IP controls to obtain an IP address automatically (see “Client Configuration” on page 11 ).
The first step in troubleshooting is to check the status indicator lights (LEDs) in the order outlined
below.
Basic Troubleshooting
Power
Ethernet 1, 2, 3, 4
Front View
Wireless
Internet
DSL
WPS