Network management, Smart deskstream manager, Command line interface (cli) – Madge Networks Token Ring Switch User Manual

Page 34

Advertising
background image

34

Smart DeskStream Technical Presentation 34

Smart DeskStream Manager

n

Graphical, Windows-based management

n

Uses Madge’s TrueView/32 platform

l

16-bit TrueView does not support DeskStream

n

Easy to use

n

Will integrate with other platforms

l

DeskStream Mgr for HP OpenView for HP-UX and NT

l

DeskStream Mgr for Tivoli NetView for IBM AIX

Command Line Interface (CLI)

n

Text based

n

via Telnet session or Direct serial connection

n

Allows access to more complex operations

Network Management

There are two major ways of managing the DeskStream:
1. Using Trueview/32
2. Using the command line interface.

There is no 16-bit Trueview device manager for DeskStream and so it
can only be managed with Trueview/32 - the 32-bit version.

This is just another device manager and is used in the same way that
other device managers are used in Trueview.

Trueview itself can be integrated into higher level network
management software, e.g. HP OpenView and Tivoli NetView. Using
one of these to access a Madge device will bring up the Trueview
device manager.

The command line interface can be used via a null modem
connection to the 9-pin serial interface on the back of the
DeskStream, or using IP and Telnet through the normal network
ports. The content is the same.

Advertising