Mustek GSmart 350 - Manual (Page 4)

GSmart 350 Digital Still Camera
User Guide
Are you ready?
Please make sure your package has all the following items:
• GSmart 350 camera • 2 CDs (1 installation/ 1 application)
• 3 AA batteries • Camera strap
• USB connection cable • User‘s Guide
Power On your Camera (Batteries or USB)
• Battery Installation:
1. Press the release button at the bottom of the camera
and swing open the front cover.
2. Pull up the battery strip to release the batteries.
3. Insert the batteries as indicated by the (+/-) marks in the battery compartment.
The battery icon indicates low batteries.
• USB: To save battery power, you can review your images while
your camera is linked with a computer via the USB cable.
Before linking with computer, install software to avoid “unknown device” message.
Using a CompactFlash TM (CF) Memory Card (optional)
1. Turn off the camera and open the CF Card panel.
2. Slide the CF card into the slot to activate.
3. To remove: Push the Eject button (located on the bottom of the card slot).
CF Card acts as primary memory if inserted in the camera. You will be unable to save
images to the camera’s internal memory while card is inserted.
1