Motorola BLUETOOTH STEREO HEADPHONES - Manual (Page 35)

1. Make sure the headphones are turned off and unplugged. If the headphones are on, press and hold the Call
button for about 3 seconds until the indicator light flashes rapidly and turns off.
2. On the headphones, press and hold Call button for about 6 seconds until the indicator light turns on and re
mains steadily lit.
3. Right click the Bluetooth icon E at the bottom of your computer screen and select Quick Connect -> Headset ->
Find Devices. A list of all Bluetooth devices found is displayed.
4. Select Motorola HT820 and press Connect.
5. When prompted, enter the PIN code 0000 and press OK. If you do not see the prompt for a PIN code, click the
Bluetooth icon
E at the bottom of your computer screen. When pairing is successful, the indicator light on the
headphones changes from steadily lit to flashing.
Listen and Use
Open a music program on your computer and play a song. You should hear the music on the headphones.
Note: While listening to music, the distance between the PC stereo adapter and headphones can be up to 30 feet.
For information on using the music controls on the stereo headphones,
visit www.hellomoto.com/bluetoothsupport.
Reconnect
The Bluetooth devices retain the pairing information so it is easy to reconnect to the last device used after you
have performed the initial pairing.
1. Turn on the headphones by pressing the Call button for about 3 seconds until the indicator light starts flashing.
2. Right click the Bluetooth icon E at the bottom of your computer screen and select Quick Connect -> Headset ->
Motorola HT820 Headset.
35