Miller Electric Big 40 Diesel - Manual (Page 5)

Genuine Miller Accessories
(Continued)
FA-1D Lockable Flame Arrestor
Fuel Cap #043 947 Field
Fuel cap can be padlocked to
prevent vandalism. A built-in
flame arrestor prevents flames or
sparks from entering the fuel tank.
Spark Arrestor
Muffler Kit
#195 012 Field
Prevents particles
from leaving the muffler that could
potentially start a fire. Mandatory when
operating on California grasslands, brush,
or forest-covered land, and in all National
Forests. For other areas, check your state
and local laws. Meets US Forest Service
standard 5100-1B.
Vandalism Lockout Kit
#195 118 Field
Lockable hinged steel
panels cover and protect
name plate gauges and
ignition switch (padlock
included). Also includes
engine compart ment door
lock and key.
Cable Holder #043 946
Saddle-bag-style cable
holder. Convenient wrap-
around storage of coiled
cable for transportation.
Stores 100 ft of 2/0 cable
on each side.
Note: For best results do not weld when cable is coiled!
Canvas cover cannot be used with cable holder.
Roll Cage/Drip Pan
#194 918 Field
Heavy-duty galvanized
steel structure
designed to protect the
machine. The roll cage
meets offshore oil
platform requirements with a drip pan and
drain plug along with a heavy-duty lift eye.
Canvas Cover (Blue)
#194 683 Field
Attractive, waterproof
canvas cover resists
stains and mildew,
and protects the
finish of your welder.
Note: Canvas cover cannot be used with cable holder.
Stick (SMAW) Welding
Weld Leads
#173 851 2/0, 350 A, 100% duty cycle,
50 ft stinger, 50 ft work cable
#043 952 2/0, 300 A, 100% duty cycle,
100 ft stinger, 50 ft work cable
Plasma Cutting
Spectrum ® 375 X-TREME ™ #907 303
Spectrum ® 375 X-TREME ™ with X-CASE ™
#907 339 (not shown)
See Lit. Index No. PC/9.2.
Spectrum
® 625 #907 058
See Lit. Index No. PC/9.5.
Spectrum 2050 #903 777-01-2
See Lit. Index No. PC/7.0.
MIG (GMAW) or Flux Cored (FCAW)
Millermatic ®
Passport ® Plus
#907 401
Portable, all-in-one
MIG package
features ultimate
arc performance,
self-contained gas
bottle, and flexibility to plug into 115 or 230
V power with Miller exclusive Multi-Voltage
Plug. See Lit. Index No. DC/12.53.
SuitCase ™ X-TREME ™ 8VS Wire Feeder
#300 093
SuitCase
™ X-TREME ™ 12VS Wire Feeder
#195 500
Lightweight, voltage-sensing wire feeders
include secondary contactor and gas valve.
Require drive roll kit. See Lit. Index No.
M/6.41.
SuitCase ™ 8RC Wire Feeder #194 938
SuitCase ™ 12RC Wire Feeder #194 940
Lightweight and flexible enough to run a
variety of wires up to .062 in diameter.
Comes standard with remote voltage
control. See Lit. Index No. M/6.5.
MIG (GMAW)/Flux Cored (FCAW) Guns
Miller produces a com plete line of
dependable MIG guns. See Lit. Index Nos.
AY/15.0, AY/16.0 and AY/17.0.
Spoolmatic ® 30A
Spool Gun
#130 831
Air-cooled, 200-amp,
1-lb spool gun for
aluminum MIG. See Lit. Index No. M/1.73.
WC-24 Control #137 549
Use with Spoolmatic 30A.
XR ™ Wire Feeders and Guns
Push-pull system designed to handle
difficult-to-feed soft alloy wires such as
aluminum. See Lit. Index No. M/1.7,
M/1.71, and M/1.73.
TIG (GTAW) Welding
Dynasty ® 200 Series
For premium portable
AC/DC TIG arc quality.
See Lit. Index No.
AD/4.8.
HF-251 Series
#042 388
HF-251D-1, 115 VAC
#042 387
HF-251D-2, 230 VAC
High-frequency arc
starter and stabilizer.
See Accessory Lit. Index No. AY/5.0.
5