MITSUBISHI ELECTRIC WD-73837 - Manual (Page 17)

TV Menus 17
This feature restricts the access according to the U.S.
based program ratings, the time of day or by the channels.
Restricting the access using the non-U.S. based ratings
(Alternate Rating System) can be setup from the ‘Other’
submenu.
To setup the restriction or to watch TV during the •
restricted condition, pass code is required.
Pass code menu is prompted whenever Lock is
•
selected on the main menu.
Lock by Program Ratings:
Restricts access to the TV using U.S. ratings sent •
by the broadcasters.
Lock applies only to ANT and composite jacks.
•
Some signals do not contain rating information
and unable to lock.
To lock for 24 hours, set the same time for Start
•
Time and Stop Time.
Lock by Time:
Blocks all use of the TV during the specified time •
period.
Requires pass code to view during the locked
•
time.
Lock Control Panel:
D • isables the buttons on the TV’s control panel.
P • ress and hold ACTIVITY button from the panel
for about 10 seconds to unlock if the remote
control is not available.
Lock by Other Program Ratings:
Re • stricts access using non-U.S. based ratings
sent by broadcasters.
Gr
• ayed out if the Other rating is not detected in
the broadcasted signal.
Note: Other rating locks apply only to digital channels
and signals received on the ANT.
Setting a Pass Code
Input four-digit pass code using the number keys •
on the remote control.
Press
•
—
CANCEL to delete a number and move back
one space.
Press
• MENU or BACK to close the menu without setting
a pass code.
Press
• ENTER to set the pass code.
If you forget the pass code: press the number 9 and •
LAST key on the remote at the same time.
Resetting a Pass Code
The old pass code is deleted when entering the Lock
menu, and prompts you to enter a new pass code.
Lock
Controlling TV Usage