Vid eo co mpon en t s- vi deo u sb men u – Marantz IS301 User Manual

Page 15

Advertising
background image

9

NAMES AND

FUNCTIONS

ENGLISH

BASIC

OPERA

TIONS

ADV

ANCED

OPERA

TIONS

TROUBLESHOOTING

OTHERS

BASIC

OPERA

TIONS

2.

Securely connect the iPod to the docking connector of the handset.

VID

EO

CO

MPON

EN

T

S-

VI

DEO

U

SB

MEN

U

Notes

• When attaching/detaching the iPod to/from the handset, be sure to grip the handset by hand.
Improper attaching/detaching of the iPod may damage the connectors.

• When attaching/detaching the iPod to/from the handset, be sure NOT to twist the iPod, as this may damage the

connectors.

• Be careful NOT to tilt the iPod forward during use, as this may damage the connectors.

USB

MENU

USB

MENU

• NEVER insert the iPod into the handset with its protective case attached. Doing so may result in poor connection

or damage to the connectors.

• Do not use other accessories, such as an FM transmitter or microphone, with the handset. This may result in a

malfunction.

• Marantz accepts no responsibility whatsoever for any loss or damage of iPod data resulting from the use of an

iPod product connected with this unit.

r MAKING WIRELESS CONNECTION BETWEEN THE HANDSET AND EXTENDER

For wireless connection between the handset and extender, pairing is required for mutual authentication and
registration. Perform pairing, according to the procedures shown below.

PAIRING PROCEDURES

1.

Attach the handset to the base unit.

2.

Locate the extender near the base unit and connect the AC adaptors to each of them.

3.

Press and release the PAIRING button of the handset and the MODE button of the extender once.

The PAIRING indicator will light in red (connection not established).

MODE

MEN

U

PAIRING

4.

Press and hold the PAIRING button of the handset and the MODE button of the extender for 5

seconds or more until the PAIRING indicator starts alternate fl ashing in blue and red at intervals
of 0.5 second. The handset and extender will search for each other’s pairing device.

5.

After searching and pairing are completed, the color of the fl ashing PAIRING indicator at intervals

of 0.5 second will change to blue. The unit will automatically start preparing for wireless audio
playback.

When the PAIRING indicator starts fl ashing in blue at intervals of 5 seconds, preparation for audio playback
is completed.
Play back the iPod.

Notes

• Even if wireless connection is interrupted for some reason, such as radio wave interference or power failure,

reconnection will automatically be performed.

• If reconnection is not possible, the PAIRING indicator will light in red.

In such a case, press the PAIRING button of the handset twice to disconnect then press the same button again

so that the PAIRING indicator lights in red.

Then press the PAIRING button once again. The PAIRING indicator will start fl ashing in blue at intervals of

0.5 second to start preparing for reconnection. When the PAIRING indicator starts fl ashing in blue at intervals
of 5 seconds, preparation for reconnection is completed.

IN A CASE WHERE THE IPOD AND HANDSET ARE USED DETACHED FROM THE BASE UNIT

Depending on the type of iPod, the handset may not enter Wireless mode when the iPod is started.
In such a case, detach the iPod from the handset with the iPod’s power on then reconnect it to the
handset.

BASIC OPERATIONS

Advertising