Metra Electronics LEXUS 99-8150 - Manual (Page 6)

99-8150 KIT ASSEMBLY
4
Mount the ISO brackets to the radio
using the screws supplied with the
radio. (Figure A) 1
Slide the radio into the radio housing
until the ISO brackets snap into place.
(Figure A) 2
Snap the trim plate onto the front of
the radio housing. (Figure A) 3
NOTE: To remove the mounted after-
market radio, unclip and remove the
ISO trimplate. Using a small flat blade
screwdriver, disengage the side clips
securing the ISO brackets to the
Radio Housing. (Figure B)
Continue to final assembly.
LEXUS ES SERIES 1992-1996
ISO MOUNT RADIO PROVISON WITH POCKET
Note: Refer also to the instructions included with the aftermarket radio.
A
B