Creating entries – Motorola i275 User Manual
Page 43
34
Contacts
Showing Only Private IDs,Talkgroups,
and SDG Lists*
To set Contacts to show only entries that contain
Private IDs, Talkgroups, and SDG lists*:
1 From the Contacts list, press
m
.
2 Select Filter.
3 Set this option to Show Prvt/Grp.
To set Contacts to show all entries:
1 From the Contacts list, press
m
.
2 Select Filter.
3 Set this option to Show All.
* Selective Dynamic Group Calling (SDGC) may not be offered by
your service provider.
Creating Entries
A number or address and a Contacts type are
required for all Contacts entries. Other information
is optional. You may enter the information in any
order by scrolling through the entry details.
After you have entered the number or address,
Contacts type, and any other information you want,
you can press
A
under Done to save the entry to
Contacts.
To cancel a Contacts entry at any time press,
e
to return to the idle screen.
To create a Contacts entry:
1 To access the entry details screen:
Select Contacts > [New Contact]. -or-
From the Contacts list, press
m
. Select New
Contact.
2 If you want to assign a name to the entry:
Select Name.
Enter the name. When you are finished, press
O
.
Tip: Press
A
under Browse to select a name
already in Contacts.
3 If you want to assign a ring tone to the name:
Select Ringer.
Select the ring tone you want to assign.
4 To assign a Contacts type to the number or
address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
Note: For information about creating SDG lists,