Motorola Digital Cordless Phone D1004 - Manual (Page 8)

8 Getting started
To keep your batteries in the best condition, leave the
handset off the base for a few hours at a time.
Running the batteries right down at least once a week will
help them last as long as possible.
The charge capacity of rechargeable batteries will reduce
with time as they wear out, giving the handset less talk/
standby time. Eventually they will need to be replaced.
After charging your handset for the first time, subsequent
charging time is about 6–8 hours a day. Batteries and
handset may become warm during charging. This is normal.
Setting up your D1000
Welcome screen
1. WELCOME is displayed and scrolls in different languages.
Press
m
. The country name is shown on the display.
2. Scroll
u
or
d
to your country and press
m
. CONFIRM?
is displayed.
3. Press OK to confirm.
The handset and base will reset to load the correct
settings. The standby screen is then displayed and your
phone is ready to use.
You can still make and receive calls without first selecting
your country and network operator, however the Welcome
screen will re-appear until you have configured your phone
country settings.
Date and time
Providing you have subscribed to your network’s Caller
Display service, the date and time is set automatically for all
handsets every time a call is received.
If you do not have a Caller Display service you can set the
date and time manually.
Set date and time manually
1. Press
m
and scroll
d
to CLOCK/ALARM . Press
m
.
Display shows DATE & TIME , then press
m
.
2. Enter the date using the format DD/MM e.g. 04/ 08 for 4th
August.
3. Press
m
and enter the time using the 24 hour format
HH:MM , e.g. 14:45 for 2:45pm.
4. Press
m
to confirm or
>
to return to standby.
YOUR D1000 IS NOW READY FOR USE.