Mercedes-Benz 2003 CLK 500 - Manual (Page 320)

320
Practical hints
Replacing bulbs
Front lamps Bi-Xenon*-type
1 Bulb socket for turn signal lamp
2 Housing cover for high beam lamp
3 Housing cover for Bi-Xenon* lamp
4 High beam bulb
5 Parking and standing lamp
High beam bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 253).
̈ Turn housing cover 2 counterclockwise
and remove.
̈ Turn bulb holder 4 with the bulb coun-
terclockwise and remove.
̈ Press the bulb backwards and turn
counterclockwise out of the bulb hold-
er.
̈ Press the new bulb into the holder and
twist it clockwise.
̈ Place the bulb holder back into the
lamp and turn it clockwise.
̈ Place the housing cover 2 back on and
turn them clockwise.
Warning!
G
Do not remove the cover 3 for the Bi-Xenon*
headlamp. Because of high voltage in xenon
lamps, it is dangerous to replace the bulb or
repair the lamp and its components. We rec-
ommend that you have such work done by a
qualified technician.