Turn signals;combination switch:turn signals, Turn signals and high beam windshield wipers – Mercedes-Benz 2003 CLK 500 User Manual
Page 47
Advertising
47
Getting started
Driving
Turn signals and high beam
The combination switch is on the left of the
steering column.
Combination switch
1 Turn signals, right
2 Turn signals, left
̈
Press the combination switch up 1 or
down 2.
High beam
̈
Push the combination switch forward.
The high beam headlights are switched
on.
The high beam symbol A in the
tachometer lights up.
More information can be found in the
"Controls in detail" section (
Windshield wipers
The combination switch is on the left of the
steering column.
Combination switch
1 Single wipe
2 Switching on windshield wipers
̈
Make sure that the ignition is switched
on.
i
To signal minor directional changes,
move combination switch to point of
resistance only and release. The turn
signal blinks three times.
Advertising
This manual is related to the following products: