Mazda 2010 3 4-DOOR - Manual (Page 4)

3
Slide/Tilt Switch
Seat can be moved back and forth,
raised, lowered, or tilted with this control.
Recline Switch
Seatback angle can be changed
with this control.
To Program the Driver’s Seat Position:
1 Park vehicle.
2 Adjust seat to desired position using the Slide/Tilt and Recline switches.
3 While holding the SET button in, press one of the three (3) programming
buttons until a beep sound is heard. Programming is now complete.
Program remaining buttons as necessary.
You can also program one seat position for each advanced •
key/retractable type key used with the vehicle. See Owner’s
Manual for programming instructions.
To Move the Seat to a Programmed Position:
Press and release one of the programmed buttons (1, 2, or 3) when •
entering the vehicle (driver’s door open and ignition OFF).
Press and hold one of the programmed buttons (1, 2, or 3) in all
•
other situations (driver’s door closed or ignition ON).
NOTE: Memory seat functions do not operate while the vehicle is in motion.
ELECTRONICALLY OPERATED DRIVER SEAT CONTROLS
MEMORY SEAT
PROGRAMMING
SWITCHES
Seats
168907_10a_Mazda3_SSG_110608.indd 4 11/6/08 4:59:00 PM