Motorola HT820 - Manual (Page 2)

Your Headphones & Audio Device
After successfully pairing, you do not need to
repeat these initial setup steps each time you
use the headphones. Just power on both
devices and they automatically connect.
1
2
To confirm they are operating properly:
3 TEST AND USE
Place the headphones on your head. See
Wear the Headphones in this guide.
Start playing music on the audio device. If
your headphones are successfully paired,
you will hear music in the headphones.
Note: You may need to wait several seconds before
hearing music in the headphones while the devices
connect.
See Music Controls for information about
using the HT820 volume and playback
controls.
Your headphones are successfully paired
with a device and ready to use when the
blue indicator lights changes from steadily lit,
flashes rapidly, and then slowly flashes.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The Bluetooth trademarks are owned
by their proprietor and used by Motorola, Inc. under license. All
other product or service names are the property of their
respective owners. © Motorola, Inc. 2006.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1-800-461-4575 (Canada)
6809496A47-B
Your headphones are designed to be worn
comfortably with the neck band positioned
behind your head.
The microphone is located in the right ear-piece.
Digital Signal processing is used for clear pick-
up of your voice during voice calls.
WEAR THE HEADPHONES
To turn your headphones on, press and hold
the left side Call
m
button until the indicator
light flashes 3 times (about 3 seconds). Then,
release the button.
To turn your headphones off, press and hold
the left side Call
m
button until the indicator
light flashes rapidly and then turns off (about 3
seconds).
To conserve battery power, turn off the
headphones when you will not be using it.
TURN ON AND OFF
Note: The remote control functions only
work when the headphones are directly
connected to source device. via Bluetooth.
CONNECT SIMULTANEOUSLY
Simultaneous connect your headphones
with a music device AND your phone!
Pair the headphones to the music device
(PAIR). Then pair the headset with your
phone (backside of guide). Power your
headphones off and then back on. After a
few moments it will connect with both the
music device and phone.
Bluetooth
Enabled
Phone
Any Bluetooth
Enabled Audio
Device*
o