Motorola 68P09396A92-A - Manual (Page 19)

BASIC OPERATION
Weak Signal Strong Signal
The SSM appears every time you turn your phone on. After 8
seconds, the SSM will continuously flash the relative strength of the
signal received by the phone.
To best utilize the SSM, you should familiarize yourself with the rel-
ative Signal Strength levels and their associated Call Placement and
Call-in-Progress qualities.
D i s p l a y i n g B a t t e r y V o l t a g e M e t e r
1. Press Ï, ›.
The Battery Voltage Meter (BVM) represents the current voltage
level of the battery being used. You can use this to estimate the
amount of battery capacity remaining. The BVM is displayed as a
battery bar graph at the left side of the display.
Low Battery Charged Battery
Variables such as temperature, battery age, and charging conditions
may affect battery voltage. To help remember which key to use,
note that “batt” appears on the › key.
L o w B a t t e r y W a r n i n g
Low battery power is indicated by a short dual tone repeated peri-
odically, and the displayed message
LoBAT. If the message is
ignored, the phone will automatically turn itself off as the battery
approaches discharge.
888
8888888
888
8888888
19