Motorola MD670 Series - Manual (Page 45)

43
Settin
g Up
O
p
tion
al
C
h
ar
ging
Base
s and
Ex
pa
nsion
Hands
e
ts
Personalizing and Using Expansion
Handsets
To personalize (set ring tones, time) expansion
handsets, refer to the instructions beginning on
page 21 of this user’s guide. To use expansion
handsets, refer to the instructions beginning on
page 27 of this user’s guide.
4 Press NEW ( a ) on the handset. The
ENTER BASE ID screen displays.
5 Using the keys on the handset, enter the
15-digit base ID code, then press
OK ( a ).
If you make a mistake while entering the
code, press the left soft key (
< ) to clear it.
Important: The base ID code may contain
numbers and characters such as #. Make
sure to enter all 15 numbers and
characters.
If ENTER BASE ID displays, 1 or more
characters were entered incorrectly. Re-
enter the base ID code.
Several screens display briefly, the handset
sounds a confirmation beep, and then
returns to the standby screen.
Action
4110W42o.book Page 43 Tuesday, July 22, 2003 2:07 PM