Morphy Richards 29118 REV2 - Manual (Page 8)

U UK K H He ellp plliin ne e 0 08 87 70 0 0 06 60 0 2 26 61 14 4 IIrre ella an nd d H He ellp plliin ne e 1 18 80 00 0 4 40 09 91 11 19 9 7 7
STANDBY
1 1 Press the power button on the
woofer cabinet, unit is in
standby mode.
2 2 Press STANDBY button on the
CD unit (or remote) to switch the
unit on.
3 3 Select the sound source (CD,
AUX, CARD-USB or TUNER) by
pressing FUNCTION button.
The corresponding display will
light up.
4 4 Adjust the VOLUME with the
volume (UP or DOWN) button
5 5 Set the preset equaliser (PASS,
CLASSIC, ROCK, POP, OR
JAZZ) with the EQ button on the
remote.
6 6 Press STANDBY button again on
the CD to turn off the unit.
CLOCK SETTING
In the standby mode.
1 1 Press and hold MEMORY/CLK-
ADJ. button until the time
displays 24-hour digit flashing.
2 2 Press SEARCH/SKIP/TUNING
(DOWN or UP) button to adjust
12 hour or 24 hour digit.
3 3 Press MEMORY/CLK-ADJ.
button again, the time display
HOUR digit flashes, press
SEARCH/SKIP/TUNING (DOWN
or UP) button to adjust HOUR
digit; Press MEMORY/CLK-ADJ
button once more, the MINUTE
digit flashes, adjust it by the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
4 4 Press the MEMORY/CLK-ADJ
button again to confirm the
time.
5 5 Each enable state as shown
above will be cleared if the key
is not pushed in 10 seconds.
6 6 In the CD or TUNER mode.
Press and hold the
MEMORY/CLK-ADJ button a
few seconds. To check the
current time.
TIMER SETTING
(on the remote)
1 1 After adjusting clock, press the
TIMER button for a few
seconds, ‘ON and 00:00’
appears on the display and the
HOUR digit flashes. D.
2 2 Press the
SEARCH/SKIP/TUNING (UP or
DOWN) button to adjust it.
3 3 Press the TIMER button again,
the MINUTE digit will start
flashing, adjust it by pressing
SEARCH/SKIP/TUNING (UP or
DOWN) button.
4 4 Press the TIMER button once
more to confirm/order TIMER
ON time.
5 5 After adjusting ‘TIMER ON’, ‘
OFF’ appears on the display and
the HOUR digit flashes. E
6 6 Repeat the above steps 2 to 3,
then press the TIMER button
once more to confirm/order
TIMER OFF time.
7 7 Now the TUNER or CD appears
on the display with flashing,
adjust ‘TUNING’ or ‘CD’ by
pressing the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
8 8 Press the TIMER button again,
the timer ‘VOL 15’ indicator
appears on the display and
flashes, adjust the timer volume
high or low by the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
9 9 Each enable state as shown
above will be cleared if the
button is not pushed in 10
seconds.
1 10 0 After adjusting ‘TIMER ON” and
‘TIMER OFF’, press the TIMER
button. ‘ ‘ appears on the
display.
1 11 1 The unit will be switched on
automatically at ‘TIMER ON’ and
start playing and the unit will be
switched off automatically at
‘TIMER OFF’.
Note: N.B Not available with
USB or SD.
D
E
29118 rev2 8/8/06 13:05 Page 8