Before use, Dual control models, Safeguard overheat protection system activation – Morphy Richards Safeguard EB75270 User Manual

Page 4

Advertising
background image

4

4

BEFORE USE

Before using this appliance,

ensure that the voltage indicated

on the product corresponds

with the mains voltage in your

home. If you are in any doubt

about your supply, ask your

electrical dealer or local

electricity company.

WARNING: Do not attempt

to use the blanket with

controls other than those

supplied with the unit as

referred to on the rating

label attached to the

blanket.

Dual control models

On double dual models, users

are able to control their own

side of the bed with individual

controls, tailoring independent

temperatures to independent

needs.

Each side of the blanket has a

completely separate element

and each is supplied with it’s

own independent mains lead. A

13amp plug on each lead is

essential.

Do not connect both flexible

cords to one 13amp plug.

The two leads should preferably

be plugged into individual

sockets. However, if only one

socket is accessible, then a

multi adaptor should be used.

WARNING: If you are unsure

about electrical

connections, please contact

a qualified engineer.

It is quite normal for the switch

to become warm, as the

components encased are part

of the protection circuit.

SAFEGUARD

OVERHEAT

PROTECTION

SYSTEM
Activation

The system will remain dormant

indefinitely as long as the

blanket is operating in the

normal temperature range. If, for

any reason, the blanket is

operated in an abnormal

situation or condition which

would otherwise have induced a

rapid temperature rise high

enough to constitute a hazard,

the OVERHEAT SYSTEM should

intervene by cutting off the

supply current before the

temperature reaches the point at

which damage may occur.

It is normal for the lead from the

blanket to the switch to become

warm as this is part of the

heater protection circuit

extended to the switch.

In the event of the OVERHEAT

SYSTEM operating, the blanket

will cease to function.

WARNING: No attempt

should be made to repair

the blanket or have it

repaired locally and the

switch supplied must never

be replaced as the

specialised components are

not generally available.

The fact that this blanket

incorporates the overheat

system does not absolve the

user from observing these

instructions.

UUKK HHeellpplliinnee

00884444 887711 00994488

IIrreellaanndd HHeellpplliinnee

11880000 440099 111199

75270 rev2 22/4/08 10:40 Page 4

Advertising